FUTABA 12Z Series Instruction Manual page 40

4. Fuselage linkage
Connect the throttle rudder, aileron, elevator,
pitch, and other servos in accordance with the
kit instruction manual. For a description of the
connection method, see "Receiver and Servos
Connection".
*The channel assignment of the T12Z is different
assigned to each function can be checked at the
Function menu of the Linkage Menu.)
40 <Model Basic Setting Procedure>
5. Throttle/Pitch curve setting
This function adjusts the throttle or pitch
operation curve in relation to the movement of the
throttle stick for each condition.
(17 points curve)
The throttle/pitch curve can be freely selected from
linear operation curve to smooth curve, and adjusted
to match the curve you want by means of the T12Z's
powerful Curve Edit Function (6 types of curves can
be selected). Up to 17 points can be set for linear
or curve types. However, when using the 3 points
smooth curve can be created by selecting the curve
type and reducing the number of input points to 3
or 5, and then entering the specified value at the
corresponding points that you created.
Call the throttle curve of each condition with the
condition select switch.