FUTABA 12Z Series Instruction Manual page 82

AIL to CAMBERFLP
This mix operates the camber flaps (FLP1/2)
in the aileron mode. When the aileron stick
is manipulated, the ailerons and camber flaps
perform aileron operation simultaneously and
the operation characteristic of the roll axis is
improved.
call the setup screen shown below by pushing the
enter button.
[Return Key]
switching
(For more information, refer to
the description at the back of
this manual.)
Setting method
data input dial to the left and push the enter
(For a description of the switch selection method,
see the description at the back of this manual.)
data input dial.
82 <Model Menu (Airplane/Glider Functions)>
more
(Chip Aileron)
*For a description of the curve setting method, see the
description at the back of this manual.
turn the
FLP 1
(Camber Flap)
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
*The display screen is an example. The actual
screen depends on the model type.
(Currently selected condition name)
PUSH
*When the mixing direction is reversed by the linkage,
adjustments can be made by changing the mixing rate
polarity (+ or -).
(For a description of the mixing curve setting
method, see the description at the back of this
manual.)
FLP 2
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
[Cursor Lever]
[Data Input Dial]
[Enter Button]