Pit Curve - FUTABA 12Z Series Instruction Manual

PIT CURVE/PIT TRIM

PIT Curve

This function adjusts the pitch operation curve
relative to movement of the throttle stick.
*The pitch curve can be freely selected from linear operation
curve to smooth curve, and adjusted to match the curve you
want by means of the T12Z's powerful Curve Edit Function
(6 types of curves can be selected). Up to 17 points can be
setup screen shown below by pushing the enter
button.
[Return Key]
(For more information,
refer to the description
a t t h e b a c k o f t h i s
manual.)
Normal curve adjustment
create a basic pitch curve centered about
curve so that up/down control is best at a
constant engine speed.
Idle up curve adjustment
other purposes and use the idle up curves
is reset.
Throttle hold curve adjustment
*For a description of the curve setting method, see the
description at the back of this manual.
Operation precautions
<Functions of Model Menu (Helicopter Functions)>
set for linear or curve types. However, when using the 3
smooth curve can be created by selecting the curve type
and reducing the number of input points to 3 or 5, and then
you created a curve.
(Currently selected condition name)
PUSH
setting
(For a description of the setting
method, see the description at
the back of this manual.)
WARNING
When actually starting the engine and
idling state.
[Cursor Lever]
[Data Input Dial]
[Enter Button]
107