Sewing A Single Built-In Design - ELNA 8600 Instruction Manual

Designs
Hoop Size A(F): 126 110mm
X
1 2
5 6
Ready to Sew
1
30 min
P
Size
2
1
GS
Snow
Seashell
White 5597 5776 Gray
3 4
A Z
7 8
Edit
2 2
5 Colors
109x84mm
A Z
A(F):126x110mm
3 4
Green
5802 Dust 5757
Jog
Edit
ST

Sewing a Single Built-in Design

Select a design.
Touch "Return" key in the hoop size warning message.
Hoop fabric and attach hoop to carriage. Position needle
directly over centerlines on fabric. Thread machine with
first thread color. Lower presser foot.
Press "Start/Stop" key and sew 5 or 6 stitches. Stop
machine by pressing "Start/Stop" key.
Raise presser foot. Cut away beginning thread tail close
to the start point. Lower presser foot.
Press the "Start/Stop" key and let the machine sew until
it stops automatically for the thread change.
Sew entire design using method described above for
each thread change.
When design is finished, the word "Completed" will
appear. Touch the "Return" key.
The design should be aligned with the centerlines on the
fabric.
HINT: You can check the design positioning before
sewing with the tracing key or template sheets.
93