Table of Contents
Advertisement
Sewing Additional Buttonholes
To sew another buttonhole - raise foot, move fabric,
lower foot and sew.
When buttonhole sewing is finished, push the buttonhole
lever upward as far as it will go.
Cutting Open Buttonhole
Place a pin just inside the bartack at each end to prevent
accidentally cutting bartacks. Cut buttonhole open with
the seam ripper.
Troubleshooting Tips
If the button is extremely thick and difficult to fit through
the test buttonhole, you can lengthen the buttonhole by
pulling back the buttonholder on the foot a little extra.
The length of the hole will increase by that same
amount.
Make sure there is not a gap between the slider and
the spring holder. If there is a gap, the sides of the
buttonhole will be different lengths t.
q
q Buttonholder
w Slider
e There should be no gap
r Spring holder
w
t Buttonhole sides sewn incorrectly
e
t
r
51
Hide quick links:
Advertisement
Table of Contents
