Download  Print this page

Adjusting The Needle Thread Tension - ELNA 8600 Instruction Manual

Hide thumbs

Advertisement

q
w
q

q
3
4
A message window will appear for a few seconds to
e
remind you to change machine set-up.
q
w
e

Adjusting the Needle Thread Tension

Align the number 2 on the tension dial with the setting
mark q.
Balanced thread tension:
A small portion of needle thread should appear on the
underside of the fabric.
When adjusting needle thread tension, the higher
numbers tighten, the lower numbers loosen.
The bobbin thread shows through on the topside of the
fabric.

Turn the dial to a lower number to loosen the needle
thread tension.
The needle thread forms loops and looks ragged.
2
Turn the dial to a higher number to tighten the needle
thread tension.
84
Reduce the foot pressure dial to "2" for embroidery.
(See page 9.)
Set the needle thread tension dial on "2". (See
below.)
Remove the shank and attach embroidery foot "P".
(See page 83.)
Tension is too tight
Tension is too loose

Advertisement

Table of Contents

   Also See for ELNA 8600

Comments to this Manuals

Symbols: 0
Latest comments: