Table of Contents
Advertisement
PROG. Classic BH
3
Auto
R
Pull Button Holder f irmly.
13
14
15
16
17
18
19
20
21
23
24
22
PROG.
Adjust
A Z
q
w
q
e
q
q
q
Corded Buttonhole
Corded buttonholes are found on coats and other
garments that require extra strong buttonholes. The
cording reinforces and accentuates the buttonhole.
Select 19.
Sew a corded buttonhole using the same procedure
described for a classic buttonhole 19. See pages 53-54.
•
Set the stitch width to match the thickness of the
cording. See page 52.
With the buttonhole foot raised, hook the filler cord q on
the spur w at the back of the buttonhole foot. Bring the
ends forward under the buttonhole foot.
Position the cord into the forks e on the front of the foot
to hold the ends tight.
Hand turn the flywheel to lower the needle into the
garment where the buttonhole will start and lower the
buttonhole foot.
Press the foot control and slowly sew the buttonhole.
Each side of the buttonhole and the bartacks will be
sewn over the cord q. Remove the fabric from the
machine and cut only the sewing threads.
Pull the left end of the cord q to tighten it. Thread the
end through a darning needle, draw to the wrong side of
the fabric and cut.
Cut open buttonhole.
Page 55
Hide quick links:
Advertisement
Table of Contents
