Presser Foot And Accessory Definitions - ELNA 8600 Instruction Manual

A
C
D
E
F
G

Presser Foot and Accessory Definitions

A: Standard Metal Foot
This foot comes attached to your machine. It is mainly
used for straight stitches and zigzag stitches longer than
1.0. The button locks the foot in a horizontal position
helping to sew over multiple layered seams.
C: Overlock Foot
Prevent fabric edges from raveling by finishing the edge
with a zigzag stitch. The brush on the foot helps the
stitch lie flatter and reduces puckering. Use with medium
weight fabrics.
D: Hemmer Foot
Insert the fabric into the spiral on this foot. The spiral
rolls the fabric, creating a rolled hem. An easy,
professional way to sew hems.
E: Zipper Foot
Use when sewing zippers into place. The grooves on the
underside ensure the foot glides over the zipper coil.
Attach either to the left or right of the needle to sew each
side of the zipper.
F: Satin Stitch Foot
The cutout on the underside of the foot is designed to
accommodate dense stitch formation. Ideal when sewing
satin and decorative stitches.
G: Blind Hem Foot
The guide on the foot helps ensure that the needle
catches only one or two fibers of the hem, resulting in an
invisible hemline.
6