Thread Holder; Embroidering Small Areas; Embroidery Design Selection Window Keys - ELNA 8600 Instruction Manual

Designs
Hoop Size A(F): 126 110mm
X
1 2
5 6
3 4
A Z
7 8
Edit

Thread Holder

To prevent the needle thread start end from entangling
into embroidery, secure needle thread into the thread
holder from front to back. (Needle thread should be
passed through hole in presser foot P.)

Embroidering Small Areas

Attach stabilizer (cut larger than embroidery hoop) to
small piece of fabric. Draw centerlines and place
stabilizer in hoop.

Embroidery Design Selection Window Keys

1. Built-in designs
There are 59 built-in designs. For an overview, see
1 page 114.
2. Alphabets
2
Three distinctive fonts – Gothic, Script and
Cheltenham. In addition, 2 letter and 3 letter
3
monogramming. See page 115.
3. PC design cards (optional)
4
Use either Embroidery cards (beginning from 1001)
or designs from other sources that are stored in the
5
Compact flash. See page 101.
4. Card reader (optional)
See instructions included with card reader.
5. Edit
This is the window where you can modify and
combine designs. See page 102.
89