Threading the Machine
Raise the presser foot with the presser foot lever. Press
the "Up/Down Needle" key until the needle is in an up
position. Turn OFF the power switch.
Using both hands, pull thread towards left and insert
q
thread into slit q. Pull thread forward around guide w.
(Thread pathway is indicated on the machine with solid
line.)
w
0
AUTO
9
Guide the thread down right channel and around the
checkspring holder e.
e
Pull the thread up the left channel to the take-up lever.
Firmly pull thread from right to left, over the take-up lever
and down into the take-up lever eye r.
r
Proceed down left channel and through the lower thread
guide t.
t
Slide the thread to the left behind the needle bar thread
guide y.
Thread the needle from front to back manually or use the
built-in needle threader. See page 28.
y
27