Winding A Bobbin; Additional Spool Pin - ELNA 8600 Instruction Manual

e
(A)
(B)
t
r
q
w
e
w
q

Winding a Bobbin

To remove bobbin, slide bobbin cover plate release
button q to the right and lift away the bobbin cover plate
w.
Lift out the bobbin e. (Always use bobbin type supplied
with machine.)
Lift up the spool pin. Place the spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the spool holder and press it firmly against the
spool of thread.
NOTE: Spool holder needs to be changed according to
the type of thread spool.
(A) Large spool
(B) Small spool

Additional Spool Pin

The additional spool pin can be used to wind a bobbin
without unthreading the machine.
PROCEDURE: Insert the spool stand w and the
additional spool pin e in the hole q. Place the felt r
and spool t on the pin with the thread coming off the
spool as shown.
NOTE: Hole is located in front and to the right of the
standard spool pin.
24