Using The Fine Adjustment Screw - ELNA 8600 Instruction Manual

w
r
(+)
y
(+)
i
(+)
!0
(+)
q
e
t
(–)
u
(–)
o
(–)
!1
(–)
13

Using the Fine Adjustment Screw

Choice of fabrics and threads may affect the stitch
formation when sewing decorative stitches, letters and
numbers or classic 4 step programmable buttonhole 19.
The fine adjustment screw can be used to either
lengthen or shorten the stitch.
q Fine adjustment screw
w Standard mark
e Setting mark
To fine tune, use a screwdriver to move the setting mark.
If stitches are too short r, correct by turning the
•
screw in the direction of "+".
If stitches are too long t, correct by turning the
•
screw in the direction of
If letters are overlapped y, correct by turning the
•
screw in the direction of "+".
If letters are too spread out u, correct by turning the
•
screw in the direction of
19 Classic 4 Step Programmable Buttonhole (Applies
only to this style)
Always make the adjustment according to the left side.
If left side of buttonhole is less dense (too open) i
•
compared to right side, correct by turning the screw
in direction of "+".
• If left side of buttonhole is more dense (too closed)
o compared to right side, correct by turning the
screw in direction of "–".
If eyelet overlaps !0 , correct by turning the screw in
•
direction of "+".
If eyelet is open !1 , correct by turning the screw in
•
"–".
direction of
"–".
"–".