Sewing A Single Built-In Design - ELNA 8200 Instruction Manual

Designs
Hoop Size A(F): 126 110mm
X
1 2
5 6
Mode
Ready to Sew
1
30 min
Size
P
A(F): 126x110mm
2
1
GS
Snow Seashell
Gray
White
Mode
3 4
A Z
7 8
Edit
2
5 colors
109x84mm
A Z
3 4
Green
Dust
Edit
Jog
ST
START
STOP

Sewing a Single Built-in Design

Select a design.
Touch "Return" key in the hoop size warning
message.
Hoop fabric and attach hoop to carriage. Position
needle directly over centerlines on fabric. Thread
machine with first thread color. Lower presser foot.
Press "Start/Stop" key and sew 5 or 6 stitches.
Stop machine by pressing "Start/Stop" key.
Raise presser foot. Cut away beginning thread tail
close to the start point. Lower presser foot.
Press the "Start/Stop" key and let the machine sew
until it stops automatically for the thread change.
Sew entire design using method described above
for each thread change.
When design is finished, the word "Completed" will
appear. Touch the "Return" key.
The design should be aligned with the centerlines
on the fabric.
HINT: You can check the design positioning before
sewing with the tracing key or template sheets.
28