Presser Foot Lifter; To Attach And Remove The Presser Foot - ELNA 120 Instruction Manual

Presser Foot Lifter

The presser foot lifter raises and lowers your presser
foot.
You can raise it about 0.6 cm (1/4˝) higher than the
normal up position for easy removal of the presser
foot or to help you to place heavy fabric under the foot.
w
q Normal up position
w Highest position
q

To Attach and Remove the Presser Foot

CAUTION:
Turn off the power switch when changing a presser foot.
To remove
Turn the handwheel toward you to raise the needle to its
highest position.
Raise the presser foot.
Press the lever on the back of the foot holder.
The presser foot will drop off.
To attach
w
q
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
q Pin
w Groove
5