Presser Foot Definitions - ELNA 6001 Instruction Book

PDFMAILER.DE

Presser Foot Definitions

A: STANDARD METAL FOOT A
This foot comes attached to your machine. It is
mainly used for straight stitches and zigzag stitches
longer than 1.0. The button locks the foot in a hori-
zontal position helping to sew over multiple layered
seams.
C: OVERLOCK FOOT (optional)
Prevent fabric edges from raveling by finishing the
edge with a zigzag stitch. The brush on the foot
helps the stitch lie flatter and reduces puckering. Use
with medium weight fabrics.
D: HEMMER FOOT (optional)
Insert the fabric into the spiral on this foot. The spiral
rolls the fabric, creating a rolled hem. An easy, pro-
fessional way to sew hems.
E: ZIPPER FOOT
Use when sewing zippers into place to avoid the foot
riding on top of the zipper coil. Attach either to the
left or right of the needle to sew each side of the zip-
per.
F: SATIN STITCH FOOT
The cutout on the underside of the foot is designed
to accommodate dense stitch formation. Ideal when
sewing satin and decorative stitches.
G: BLIND HEM FOOT, ADJUSTABLE
The adjustable guide on the foot helps ensure that
the needle catches only one or two fibers of the
hem, resulting in an invisible hemline. The guide can
also be adjusted to create pintucks.
R: AUTOMATIC BUTTONHOLE FOOT
Place button in foot to determine the buttonhole size.
The machine will automatically sew the correspond-
ing buttonhole.
QUILT GUIDE
The quilt guide is helpful when sewing parallel,
evenly spaced rows of stitching.
5