Table of Contents
Advertisement
Overview
Wall Mounting
If you mount the unit on the wall, you must:
•
Locate the unit as specified by the local or national codes governing residential or business cable TV and
communications services.
•
Follow all local standards for installing a network interface unit/network interface device (NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or other very solid wall material. Use anchors if
necessary; for example, if you must mount the unit on drywall.
To mount your SBG940 on the wall:
1
Print the
Wall Mounting Template
Go to
page 24
and click the Print icon or choose Print from the File menu to display the Print dialog box.
(The following image is from Adobe Acrobat Reader
slight differences in your version.)
Select this to print
page 24 only.
Be sure you print the template at 100% scale. Be sure Fit to page is not selected.
To print the template only, select Current page as the Print Range.
Click the OK button to print the template.
2
Measure the printed template with a ruler to ensure that it is the correct size.
3
Use a center punch to mark the center of the holes.
4
On the wall, locate the marks for the mounting holes.
Caution!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
5
Drill the holes to a depth of at least 1
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
on page 24.
1
/
inches (3.8 cm).
2
Contact
FAQ
Specifications Glossary License
®
version 4.0 running on Windows 2000; there may be
Be sure this is
not selected.
22
Advertisement
Table of Contents
