Table of Contents
Advertisement
Overview
5
Click Log In to display the SBG940 user configuration and status windows:
Click
To Perform
Cable
Configure and monitor the cable system connection.
Gateway
Configure and monitor the gateway preferences (see
Wireless
Configure and monitor the wireless interface (see
Firewall
Configure and monitor the firewall (see
Admin
Changing the Default
Info
Display information about the
Reboot
Restart the SBG940. It is the same as pressing the reset button on the
seconds.
Log Out
Log out of the SBG940.
If you have difficulty starting the SBG940 Setup Program, see "Troubleshooting" for information.
Router is a configuration option that may appear on your window but may not be supported.
For some settings, after you edit the field and click Apply, you are warned that you must reboot your SBG940
for your change to take effect. Rebooting takes 10 to 15 seconds. After rebooting, you must log in again.
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
"Setting the Firewall
Password.
SBG940
Setup Program.
Contact
FAQ
Specifications Glossary License
"Configuring the
Gateway").
"Setting Up Your Wireless
Policy").
Rear Panel
LAN").
for less than five
27
Advertisement
Table of Contents
