Table of Contents
Advertisement
Overview
Gateway > PORT TRIGGERS — custom Page
Use this page to create a custom port trigger:
Gateway > PORT TRIGGERS — custom page fields
Field
ADD NEW SPECIAL
APPLICATION
Name
Enable
Protocol
Port Range
(From:To)
Session Chaining
Session Interval
Address Replace
Multi Host
Add
PORT TRIGGERS TABLE Lists all port triggers you defined and their parameters.
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Description
Enter the unique name for the port trigger. This is typically the protocol.
Select this box to enable the custom port trigger.
Sets the transport protocol for the port trigger — TCP or UDP.
Sets the port range for the port trigger. Type the start of the range in the left field and the end in
the right field.
Enable session chaining if the application needs to open one or more ports in different ranges to
operate properly. The options are Disable, TCP, or TCP/UDP.
Sets the session interval for the application:
•
If the port triggers detect traffic on the Port Range within the Session Interval, it is considered
to be related to the initial session.
•
If the port triggers detect traffic on the Port Range after the Session Interval expires, it is
considered to be a new and unique session.
Sets the address replacement method for the application.
Select if appropriate for the application.
Click to add the port trigger to the PORT TRIGGERS TABLE.
Contact
FAQ
Specifications Glossary License
51
Advertisement
Table of Contents
