Table of Contents
Advertisement
Overview
Gateway > LAN — nat config Page
Use this page to enable
Gateway > LAN — nat config page fields
Field or Button
LAN
Enable NAT
Apply
NEW NAT
PASSTHROUGH
MAC Address
Bypass Firewall
(True DMZ)
Add
CURRENT NAT
PASSTHROUGH
Delete
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
NAT
and add clients to the CURRENT NAT PASSTHROUGH list:
Description
If enabled, the single HFC IP Address (public IP address) assigned by the cable provider is
mapped to many private IP addresses on the SBG940 LAN.
Click to apply your changes. You must reboot the SBG940.
Specifies up to 32 computers as passthrough clients not subject to NAT, using their MAC
addresses. To enable this feature, your cable operator may need to provide you with
additional public IP addresses.
Type the passthrough client MAC address. The format is 16 hexadecimal numerals.
Select this box to set the NAT passthrough computer as a DMZ client. Use this setting with
extreme caution because a DMZ client is completely open to Internet hackers.
Click to add the MAC address to the CURRENT NAT PASSTHROUGH list.
Lists the computers on the LAN that are configured for NAT passthrough.
Click to delete the selected MAC address from the NAT passthrough list.
Contact
FAQ
Specifications Glossary License
44
Advertisement
Table of Contents
