Table of Contents
Advertisement
Overview
Configuring the Wireless Clients
For each wireless client computer (station), install the wireless adapter — such as a Motorola
WPCI810G, or WU830G— following the instructions supplied with the adapter. Be sure to:
1
Insert the CD-ROM for the adapter in the CD-ROM drive on the client.
2
Install the device software from the CD.
3
Insert the adapter in the PCMCIA or PCI slot or connect it to the USB port.
Step 1
Step 3
Configure the adapter to obtain an IP address automatically. The Motorola wireless adapters are supplied with a
client configuration program called Wireless Client Manager, which is installed in the Windows Startup group.
On a PC with Wireless Client Manager installed, the
the icon to launch the utility.
You may need to do the following to use a wireless client computer to surf the Internet:
If You Performed
Configuring WPA on the SBG940
Configuring WEP on the SBG940
Configuring the Wireless Network Name on the SBG940
Configuring a MAC Access Control List on the SBG940
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Step 2
Contact
FAQ
Specifications Glossary License
Step 2
Step 3
Step 1
icon is displayed on the Windows task bar. Double-click
On Each Client, You Need to Perform
Configuring a Wireless Client for WPA
Configuring a Wireless Client for WEP
Configuring a Wireless Client with the Network Name
(ESSID)
No configuration on client required
WN825G,
77
Advertisement
Table of Contents
