Enabling Remote Access - Motorola SBG-940 User Manual

Overview

Enabling Remote Access

You can enable remote access to the SBG940 over the Internet. You must know the userid, password, and
public IP address assigned to your SBG940 to run the Setup Program over the Internet. Remote access is
provided using a web browser on the remote client and connecting to the SBG940 web server.
To enable remote access to the SBG940:
1
On the SBG940 Setup Program left panel, click Admin to display the ADMIN — basic page.
2
Click advanced to display the ADMIN — advanced page.
3
Click the box next to Enable remote access to enable it.
4
Click Apply to apply your change.
Caution!
Enabling remote access makes it possible for Internet users not on your network to log on to your SBG940
and view or modify your network settings. We recommend that you not enable remote access unless you
need to do so. As soon as you no longer require remote access, we recommend that you disable it.
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Contact FAQ Specifications Glossary License
29