Table of Contents
Advertisement
Overview
8
Click Next. The following window is displayed:
9
Select The updated driver... and click Next. If the following window is not displayed, verify that the SBG940
Installation CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file,
click Cancel to cancel the installation and perform the procedure for
Windows 98 Second Edition or Windows
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.
10
After the window shown under step 9 is displayed, click Next.
If a window with the message Copying Files... displays and asks for the CD-ROM drive, type the CD-ROM
drive letter (for example, "D:") and click OK.
If an Insert Disk window similar to the one below is displayed, Windows system files are needed to complete
the installation. To install the files, insert your Windows 98 Second Edition CD-ROM in the CD-ROM drive and
click OK.
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Me". Then repeat this procedure.
Contact
FAQ
Specifications Glossary License
"Removing the USB Driver from
92
Advertisement
Table of Contents
