Overview
Setting Up a USB Driver in Windows 98 Second Edition
1
Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be
inserted and read by the PC before you connect the SBG940 to the PC.
2
Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click Next. The following window is displayed:
4
Be sure "Search for the best driver for your device" is selected.
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
USB
Connection.
Contact
FAQ
Specifications Glossary License
90