I/8I And Lsi* 20320-R Scsi Card Installed; System May Go To Efi First Instead Of Hardware Raid Configuration Setup Page; System May Get Blue Screen On Display During The Installation Of Windows Server 2008* R2 Under Uefi Mode - Intel SC5650BCDP Documentation Update

Monthly Specification Update
22. System may not enter LSI* 9260-4i/8i RAID card webBIOS when both
LSI*9260-4i/8i and LSI* 20320-R SCSI card installed
Problem System may not enter LSI* 9260-4i/8i RAID card webBIOS with both LSI*
9260-4i/8i card and LSI* 20320-R SCSI card installed
Implication User may find not able to go into LSI* 9260-4i/8i RAID card webBIOS even
Ctrl+H was pressed.
Status This issue may be fixed in a future BIOS revision.
Workaround Press CTRL key again when see blinking cursor, the blinking cursor will be on
the top left corner when Ctrl+H was pressed.
23. System may go to EFi first instead of Hardware Raid configuration
setup page
Problem

System may go to EFI first instead of Hardware Raid configuration setup page

when using Hardware RAID and setting EFI as the first boot device
Implication There is no function impact associated with this erratum
Status Will not fix.
Workaround Do the following:
24. System may get blue screen on display during the installation of
Windows Server 2008* R2 under UEFI mode
Problem When installing Windows Server 2008* R2 under UEFI mode, system may
hang with BSOD (blue screen of death).
Implication User will not be able to install Windows 2008 R2* under UEFI mode. The
BSOD happens at the "Installing Windows" page.
Status This issue is fixed in BIOS 57.
Workaround None.
25. PCI Express link down error or bandwidth changed message may be
logged in System Event Log.
1. Change EFI booting order instead of first boot device.
2. Type "EXIT" in Internal EFI shell, then users can enter Raid
configuration setup page.
Enterprise Platforms and Services Marketing
11