Bios Setup May Report An Incorrect Firmware Version; Excessive Time To Enter Or Exit Efi Shell When Ahci Is Enabled In Bios Revision R0037; Must Use Software Package With Bios36/Fw36/Frusdr13 Or Later When Using 4Gb Memory Modules In The Sr1630Bc - Intel SC5650BCDP Documentation Update

Enterprise Platforms and Services Marketing
Status This issue was fixed with BMC 00.36.
Workaround None
8.

BIOS setup may report an incorrect firmware version

Problem The BIOS setup screens to display the versions of SDR and ME firmware
version may report an incorrect version. The version displayed may be of the
previously installed versions.
Implication After firmware update, the BIOS screens may not show the correct version until
the system is AC cycled.
Status This issue may be fixed in a future BMC release.
Workaround None.
9. Excessive Time to Enter or Exit EFI Shell When AHCI is Enabled in BIOS
Revision R0037
Problem If AHCI is enabled in BIOS setup, it will take the user approximately 3 or more
minutes to enter the EFI shell from BIOS Setup and approximately 3 or more
minutes to exit the EFI shell.
Implication Users should expect long delays when entering the EFI shell from BIOS setup
if AHCI is also enabled.
Status This issue may be fixed in a future BIOS revision.
Workaround None
10. Must use software package with BIOS36/FW36/FRUSDR13 or later
when using 4GB memory modules in the SR1630BC
Problem The system fans in the SR1630BC do not adequately cool the system when
populated with 4GB memory modules
Implication Users can experience the system to blue screen
Status This issue can be fixed by installing FRUSDR 13 or later.
Workaround None
6
Monthly Specification Update