Figure 7. Recommended Minimum Two-Dimm Memory Configuration - Intel MFSYS25V2 Specification

2BFunctional Architecture
Branch 0

Figure 7. Recommended Minimum Two-DIMM Memory Configuration

Note: The server board supports single DIMM mode operation. Intel only validates and supports this
configuration with a single 512MB x8 FBDIMM installed in DIMM slot A1.
3.1.3.4 Non-mirrored Mode Memory Upgrades
The minimum memory upgrade increment is two DIMMs per branch. The DIMMs must cover the same
slot position on both channels. DIMM pairs must be identical with respect to size, speed, and
organization.
When adding two DIMMs to the configuration shown in Figure 7, the DIMMs should be populated in
DIMM slots C1 and D1 as shown in the following diagram. Populated DIMM slots are shown in Grey.
12
Branch 1
Intel order number: E15154-007
Intel® Compute Module MFS5000SI TPS
Channel B
Channel A
Channel C
Channel D
TP02300
Revision 1.4