Seagate STU62001LW-S Installation Manual page 39

Viper 200 Installation Manual
1. Make sure the head assembly is in the lowered position
Figure 21. Diagram of Viper 200 showing lead screw
(tape threaded on take-up reel)
2. Replace the drive cover to protect the gear and spooling
3. Turn the drive upside down.
by turning the lead screw (shown in Figure 21) clockwise
with the flat blade screwdriver. This is necessary to allow
the load arm to clear the head assembly when it is moved
back toward the cartridge.
assemblies. You do not need to replace all the screws.
37