Freecom VALUELOADER LTO User Manual page 51

To access this option, follow these steps:
From the Home Screen or main menu, press the
1
until "Configuration" appears on the top line of the LCD
screen.
Press the
2 [Enter]
Press the or
3 [+] [-]
the LCD screen. The second line displays the current SCSI ID.
Press to select.
4 [Enter]
Press the or
5 [+] [-]
"Drive" until the desired item appears on the LCD screen.
Press the
6 [Enter]
screen displays "New ID."
Press the or
7 [+] [-]
Press the
8 [Enter]
screen displays "Please Cycle Power."
The ValueLoader will not respond to input from the
Note:
Operator 's Panel until the power has been cycled.
Turn off the ValueLoader. After a few seconds, turn it back on
9
again.
The selected SCSI ID is now in effect.
If you changed the SCSI ID, you may also need to cycle
Note:
power on the host server and reconfigure your backup
software before you can use the ValueLoader. Consult
your hardware and software manuals for more
information.
ValueLoader LTO Tape Autoloader User Manual
button to select.
button until "Change SCSI ID" appears on
button to change between "Loader" and
button to select. The second line on the LCD
button until the desired SCSI ID appears.
button to select the new ID number. The LCD
ValueLoader Administration
Configuring the ValueLoader
or button
[+] [-]
37