Freecom VALUELOADER LTO User Manual page 55

To access this option, follow these steps:
From the Home Screen or main menu, press the
1
until "Configuration" appears on the top line of the LCD
screen.
Press the
2 [Enter]
Press the or
3 [+] [-]
LCD screen. The second line displays the current status of this
mode.
Press the
4 [Enter]
The ValueLoader selects the first available slot and prompts
you to insert the firmware upgrade cartridge.
If the carousel is full, the LCD screen displays "No
Note:
slot free for transfer." If this happens, press the
[Cancel]
Home Screen appears. Then, export a cartridge as
explained in
return to step 1 of this procedure.
Insert the firmware update cartridge into the Import/Export
5
slot.
If the cartridge is not a valid firmware upgrade
Note:
cartridge, the cartridge is exported, and the LCD
displays "Bad upgrade tape."
During the firmware update, which can take several minutes,
the LCD screen displays "Code update in Progress." When the
firmware update is complete, the ValueLoader resets, then
unloads and exports the firmware upgrade cartridge.
Remove the firmware upgrade cartridge and press the
6
button when the LCD screen prompts you to do so.
ValueLoader LTO Tape Autoloader User Manual
button to select.
button until "Code Update" appears on the
button to select.
button repeatedly until the main menu or
Exporting Cartridges
ValueLoader Administration
Updating Firmware
or button
[+] [-]
on page 29 and
[Enter]
41