Freecom VALUELOADER LTO User Manual page 32

Installing the ValueLoader
Preparing the Host and Verifying the Connection
18
Right-click the
6 HP Ultrium-1 SCSI Sequential Device
then click
Properties
Select the
7 Drivers
Click the
8 Reinstall Driver
When the Upgrade Device Driver Wizard appears, click the
9
button.
Next
Click
10 Tape Drives
Click the
11 Have Disk
saved the device drivers on your system, then click the
button.
Click the
12 DLT ValueLoader Tape Drive
button.
Depending on the status of your system and the exact
Note:
path taken to select the device driver, the driver may
appear as
Click the button again to install the driver.
13 Next
Click the
14 Finish
Close the Device Properties dialog box.
15
The drive appears in the Device Manager under Tape Drives as
DLT ValueLoader Tape Drive
ValueLoader Device Driver (Windows 2000)
To install the ValueLoader device driver:
Make sure that you are logged onto the host server with
1
Administrator privileges.
Right-click the
2 My Computer
then click
Manage
The tape drive should be listed under the "Medium Changers"
item as "Unknown Medium Changer Device."
ValueLoader LTO Tape Autoloader User Manual
.
tab.
or
Update Driver
and then click the
button. Type the path to where you have
.
Dltvstp.inf
button.
. It is now ready to use.
icon on the Windows desktop,
, and then click
Device Manager
listing and
button.
button.
Next
OK
entry and click the
.
Next
1