Figure 12 Importing A Cartridge - Freecom VALUELOADER LTO User Manual

Operating the ValueLoader
Using Cartridges
Figure 12 Importing a
Cartridge
28
When "Insert Cartridge Slot" appears on the LCD screen and
6
the Import/Export slot opens, insert the desired data cartridge
into the Import/Export slot so that the write-protect switch is
facing out from the ValueLoader and toward the left, as shown
in figure 12.
If you are using the Operator's Panel to clean the
Note:
drive, import the cleaning cartridge only when the
front panel indicates that cleaning is needed. You
may keep a cleaning cartridge in the ValueLoader if
the backup software can manage the drive cleaning.
Repeat steps 5 and
7
Press the
8 [Cancel]
cartridges.
Verify that the LCD screen shows that the desired slots have
9
cartridges installed.
ValueLoader LTO Tape Autoloader User Manual
6 as needed for additional cartridges.
button when you have finished importing