Freecom VALUELOADER LTO User Manual page 33

Right-click the
3 Unknown Medium Changer Device
, and then click the
Uninstall
want to remove the device.
Click the
4 Action
Computer Management dialog box.
Click
5 Scan for Hardware Changes
ValueLoader. The ValueLoader appears under "Medium
Changers" again.
Right-click the
6 Unknown Medium Changer Device
then click
Properties
Select the
7 Drivers
Click the
8 Reinstall Driver
When the Upgrade Device Driver Wizard appears, click the
9
button.
Next
Click
10 Display a list...
Click the
11 Have Disk
saved the device drivers on your system, then click the
button.
Click the
12 DLT VS Medium Changer
button.
Depending on the status of your system and the exact
Note:
path taken to select the device driver, the driver may
appear as
Click the button again to install the driver.
13 Next
Click the
14 Finish
Close the Device Properties dialog box.
15
The ValueLoader appears in the Device Manager under Medium
Changers as
DLT VS Medium Changer
ValueLoader LTO Tape Autoloader User Manual
Preparing the Host and Verifying the Connection
button to confirm that you
OK
button in the upper-left corner of the
. Windows 2000 scans for the
.
tab.
or
Update Driver
and then click the
button. Type the path to where you have
entry and click the
.
Dltvsmc.inf
button.
. It is now ready to use.
Installing the ValueLoader
listing, click
listing and
button.
button.
Next
OK
Next
19