Creating An Inventory Of Cartridges - Freecom VALUELOADER LTO User Manual

Creating an Inventory of Cartridges

If you are using Operator's Panel commands to clean the
Note:
drive, import the cleaning cartridge only after you have
selected the Clean Drive command. If you would like to
keep a cleaning cartridge in the ValueLoader, the backup
software must manage drive cleaning.
This option builds a new inventory of cartridges in the
ValueLoader. If using a barcode reader, this option also scans the
barcode label on each cartridge in the carousel. (See
Reader on page 3 for more information.) To use this option, follow
these steps:
From the Home Screen or main menu, press the
1
until "Commands" appears on the top line of the LCD screen.
Press the
2 [Enter]
Press the or
3 [+] [-]
LCD screen. Then, press
The ValueLoader then checks the drive and each slot for the
presence of a tape in order to update inventory information.
ValueLoader LTO Tape Autoloader User Manual

Creating an Inventory of Cartridges

button to access the available options.
button until "Re-inventory" appears on the
.
[Enter]
Operating the ValueLoader
Barcode
or button
[+] [-]
2
33