Freecom VALUELOADER LTO User Manual page 75

Error Code Description
Mechanical Initialization
3 0 90
Failure.
Inventory Scan Failure.
3 0 91
3 0 92 Preposition Failed.
Cartridge Load Error.
3 0 93
3 0 94 Cartridge Unload Error.
3 0 95 Import Error.
3 0 96 Export Error.
Carousel Motion Failure.
3 0 A0
Cartridge Transport Position
3 0 A1
Error.
Gripper Position Error.
3 0 A2
Cartridge Pick Error.
3 0 A3
ValueLoader LTO Tape Autoloader User Manual
Diagnostics and Troubleshooting
Details
The robotics were not able to move to the safe
mechanical initialization position. Manual
intervention is necessary.
Fatal robotic error occurred during the
inventory scan.
Belt positioning error occurred during
'Preposition' command.
A failure occurred while trying to load a
cartridge from a slot to the drive.
A failure occurred while trying to unload a
cartridge from the drive to its slot.
An error occurred while trying to import a data
cartridge to a carousel slot.
An error occurred while trying to export a data
cartridge from its carousel slot. This can be
caused by an empty slot that is expected to be
full.
An error occurred during carousel movement
(position not found). This could be caused by a
missing or misaligned cartridge carrier, an
obstruction, or an unexpected cartridge in
either the carousel path or the import/export
slot.
The cartridge transport element is unable to
reach its desired position. Failure occurred
while trying to place a cartridge into or remove
a cartridge from the drive or a slot.
Gripper unable to reach position.
An error occurred while trying to pull a
cartridge from the drive or a carousel slot.
ValueLoader Error Codes
61