Freecom VALUELOADER LTO User Manual page 22

Installing the ValueLoader
Unpacking the ValueLoader
8
Lift the ValueLoader and padding out of the box and place it
4
on the work surface, top facing up. Do not set the ValueLoader
on either end or side.
Placing the ValueLoader on its side, on end, or
Caution:
upside down can cause permanent damage to the
unit.
Carefully remove the shipping padding from the left and right
5
sides of the ValueLoader. Then remove the bag from the
ValueLoader.
Save the packing materials in case you need to move
Note:
or ship the ValueLoader in the future.
ValueLoader LTO Tape Autoloader User Manual