Sainlogic SC-07 User Manual page 8

and -12 is 12 hours ago. The vertical axis or y-axis auto-scales, displays
the deviation from the current value (the most recent data will always
display 0). For example, when in temperature mode, if the bar displays 0.4,
this represents 0.4 degrees higher than the current value.
6.2 Set (Program) Mode
While in Normal Mode, press and hold the SET/MODE key for at least
three seconds to enter the Set Mode. The first setting will begin flashing.
You can press the SET key again to skip any step, as defined below.
Note: In the Set mode, press the [+] key or [-] key to change or scroll
the value. Hold the [+] key or [-] key for three seconds to
increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE button of
the display console.
1.Radio Controlled Clock(RCC)(default: ON)
Press and hold the SET/MODE key to set the RCC. The RCC (ON or OFF)
setting will begin flashing. Press the [+] key or [-] key to toggle between
RCC ON (adjusts automatically to the atomic clock) and RCC OFF (uses
the quartz clock).
Note: The time and date display is based on the signal provided by the
highly accurate government operated atomic clock in Fort Collins, CO. The
base station will continue to scan for the radio controlled time signal each
day at 2:00, despite if you manually set the date and time.
If reception is unsuccessful, the radio controlled time icon will not appear
but reception attempts will continue.
If reception has been successful, the received time and date will overwrite
the manually set time and date. Once the radio controlled time is received,
the RCC reception icon will turn on.
2.Daylight Saving Time Settings (default: OFF). The DST (ON or OFF)
setting will begin flashing. Press the [+] key or [-] key to toggle between
DST ON (adjusts automatically to the atomic clock) and DST OFF (uses
the quartz clock).The console has been programmed to automatically
switch when daylight saving time is in effect. Your console will display
"DST".
Note: Arizona does not observe daylight savings time. If you live in
Arizona and DST is in effect, you will need to change your time zone to -8
8