Sainlogic SC-07 User Manual page 11

SET/MODE key again to change the backlight automatic dimming of
display at night (the AUTO BL icon will be displayed). Press the [+] key or
[-] key to adjust the backlight between OFF and ON.
15.1 Backlight automatic Contrast Setting ON (default: 1). Press the
SET/MODE key again to change the backlight contrast (the DIMMING icon
will be displayed). Press the [+] key or [-] key to adjust contrast from 0 (off),
1 (dim), 2 (mid) to 3 (bright).
15.2 Change Start Hour for backlight adjustment (default: PM8:01).
Press the SET/MODE key again to change the start time of the backlight
(the STA icon will be displayed). Press the [+] key or [-] key to adjust the
hour up or down.
15.3 Change Start Minute for backlight adjustment (default: PM8:01).
Press the SET/MODE key again to change the start time of the backlight
(the STA icon will be displayed). Press the [+] key or [-] key to adjust the
minute up or down.
15.4 Change End Hour for backlight adjustment(default: 8:00am).
Press the SET/MODE key again to change the end time of the backlight
(the END icon will be displayed). Press the [+] key or [-] key to adjust the
hour up or down.
15.5 Change End Minute for backlight adjustment(default: 8:00am).
Press the SET/MODE key again to change the end time of the backlight
(the END icon will be displayed). Press the [+] key or [-] key to adjust the
minute up or down.
Note: To ensure that backlight does not affect sleep quality, you can
choose your preferred automatic backlight brightness or automatic
shutdown mode at a specified time period at night.
If powered by the adaptor and the backlight is shutdown, when alarm is
triggered the backlight turns on at the same time, and backlight turns off
when alarm is inactive.
Note: Press the HISTORY/- key and install the battery simultaneously,
RESET word shows on display and the console is restored to factory
default settings.
11