Sainlogic SC-07 User Manual page 24

Problem
Display console contrast
is weak
The atomic clock signal
is weak or no signal
The atomic signal is
strong but the wrong
time
Do not set the time or
date, and alarm
The wrong day of the
week displayed
Do not sound for both
alarms and key strokes
Solution
outdoor humidity sensors should agree within
10 % (the sensor accuracy is ± 5 %).
Use the calibration feature to match the indoor
and outdoor humidity to a known source.
Replace console batteries with a fresh set of
batteries.
A minimum distance of 8feet to all sources of
Interference , such as televisions or computer
monitors.
Radio reception is weaker in rooms with
concrete walls (e.g.: in cellars) and in offices.
In such circumstances, place the device close
to the window .
Make sure your time zone is set correctly.
Signal reception is normally better at night and
when the weather is clear. The atomic signal
generally takes 2~5 days to synchronize, so it
is important to manually set the time and date
after powering on the display.
While in Normal Mode, press and hold the
SET/MODE key for at least three seconds to
enter the Set Mode.
While in Normal Mode, press and hold the
ALARM key for three seconds to enter the
alarm mode, Then press and hold the
SET/MODE key for three seconds. The alarm
parameter will begin flashing.
Please make sure that the year, month, and
day are all set correctly.
In normal mode, press and hold the
HISTORY/- key for three seconds to turn the
beeper on.
24