10
11
12
4.12/24 Hour Format (default: 12h). Press the SET/MODE key again to
adjust the 12/24 hour format setting (FMT). Press the [+] key or [-] key
to change between 12 hour and 24 hour format.
5.Change Hour. Press the SET/MODE key again to set the hour. Press
the [+] key or [-] key to adjust the hour up or down.
6.Change Minute. Press the SET/MODE key again to set the minute.
Press the [+] key or [-] key to adjust the minute up or down.
7.Date Format (default: MM-DD). Press the SET/MODE key again to
enter the day/month format mode. Press the [+] key to switch between
MM-DD, DD-MM.
8.Change Month. Press the SET/MODE key again to set the calendar
month. Press the [+] key or [-] key to adjust the calendar month.
9.Change Day. Press the SET/MODE key again to set the calendar day.
Press the [+] key or [-] key to adjust the calendar day.
10.Change Year. Press the SET/MODE key again to set the calendar year.
Press the [+] key or [-] key to adjust the calendar year.
11.Max/Min Clearing (default: ON). Press the SET/MODE key again to
set the max/min clearing mode (CLR). The Max/Min can be
programmed to clear daily (at midnight) or manually. Press the [+] key or
[-] key to switch between ON "Clears 24h" and OFF "Clears Manually".
12.Temperature Units of Measure (default: °F). Press the SET/MODE
key again to change the temperature units of measure (the UNIT SET
icon will be displayed). Press the [+] key or [-] key to switch between °F
and °C units of measure.
13.Barometric Pressure Display Units (default: inHg). Press the
SET/MODE key again to change the pressure units of measure. Press
the [+] key or [-] key to toggle the pressure units between mmHg, inHg
or hPa.
14.Weather Forecast Icon Setting (default: partly cloudy). Press the
SET/MODE key again to set the weather forecast icon initial conditions
(based on the current weather conditions). Press the [+] key or [-] key to
toggle weather icons between sunny, partly cloudy, cloudy, or rainy.
15.Backlight Adjust Contrast Setting (default: OFF). Press the
GST: Guam Standard
---
IDLE: International Date Line
East
NZST: New Zealand Standard
10
Sydney
Magadan
Wellington, New
Zealand
Need help?
Do you have a question about the SC-07 and is the answer not in the manual?