Sainlogic SC-07 User Manual page 12

6.3 Sensor Search Mode
If the sensor communication is lost, dashes (--.-) will be displayed on the
screen. Press and hold the CH/+ button for 3 seconds to reacquire the
signal, press SET/MODE key to exit, the search icon will be displayed
constantly for 3 minutes. Once the signal is reacquired, the remote search
icon will turn off, and the current values will be displayed.
6.4 History Graph Mode
The historical graph on the display changed to display the measured
parameters.
In normal mode, press the HISTORY/- key to toggle between:
 The barometer graph (the BAROREL icon is displayed)
 Indoor temperature graph (the TEMP-IN icon is displayed)
 Indoor humidity graph (the HUMI-IN icon is displayed)
 Outdoor temperature graph (the TEMPOUT icon is displayed)
 Outdoor humidity graph (the HUMIOUT icon is displayed)
6.5 Reset Min/Max record
In normal mode, press (do not hold) the ALARM key, the MAX icon will be
displayed. Press the HISTORY/- key to view pressure (ABS or REL) and
temp or dew point(outdoor) max value.
Next, press and hold the SET/MODE key for three seconds to clear the
maximum values of pressure, temperature and humidity. The maximum
values will now display the current values.
Press the ALARM key again (do not hold), the MIN icon will be displayed.
Press the HISTORY/- key to view pressure (ABS or REL) and temp or dew
point(outdoor) min value.
Next, press and hold the SET/MODE key for three seconds to clear the
minimum values of pressure, temperature and humidity. The minimum
values will now display the current values.
Press the SNOOZE key to exit the min/max checking and cleaning mode,
return to normal display mode.
12