1. Getting Started
The weather station consists of a display console (receiver) and one
thermo-hygrometer Sensor (remote transmitters).
Note: Power up the sensors with battery first, and the Display Console
with adapter second, don't press any button until all data is received.
1.1Parts List
QTY
Display Console
1
Frame Dimensions (LxHxW): 8.5X0.87X6.2inch
LCD Dimensions (LxW): 6.7 x 4.92inch
1
Thermo-hygrometer Sensor
1
Manual
1
Power Adapter
2. Weather Station Power On
2.1 Thermo-hygrometer Sensor
Note: To avoid permanent damage, please take note of the battery
polarity before inserting the batteries.
Note:Lithium batteries are recommended for cold weather
environments.
1. Open the battery compartment as shown below. Insert two fresh AAA
batteries(with the negative terminal of the battery in contact with each
spring).
2. The LED shown in Figure 1 will light up (visible through the plastic).
3.
It is recommended you mount the thermo-hygrometer sensor outside in
a shaded area. A north facing wall is preferred because it is in the shade
most of the day. Direct sunlight and radiant heat sources will result in
inaccurate temperature readings. Although the sensor is not waterproof, it
is best to mount in a well protected area, such as under an eve
Item
Figure 1
3
.
Need help?
Do you have a question about the SC-07 and is the answer not in the manual?