Sainlogic SC-07 User Manual page 22

Measurement
Outdoor
Humidity
Barometric
Pressure:
11.3 Power Consumption
 Base station (display console): 3 x AAA 1.5V Alkaline or Lithium
batteries (not included)
 Adaptor: 5.9V~ 500mA (included)
 Thermo-hygro Sensor: 2 x AAA alkaline batteries or Lithium batteries
(not included)
 Battery life: Batteries in base stations with good reception will last
at least 3 months.
Intermittent reception may shorten battery life.
(Use lithium batteries in cold climates below -20 °C).
1. Clean the Thermo-hygrometer once every 3 months
2. Replace the thermo-hygrometer transmitter batteries once every 3
months.
13. Troubleshooting Guide
Problem
Wireless remote not
reporting in to console.
There are dashes (--.-)
on the display console
Range
10 to 99%
8.85 to 32.50
inHg
Solution
If the sensor communication is lost, dashes
(--.-) will be displayed on the screen. To
reacquire the signal, press and hold the
CHANNEL/+ button for 3 seconds, the remote
. search icon
Once the signal is reacquired, the remote
search icon
values will be displayed.
The maximum line of sight communication
range is 300ft and 100ft under most conditions.
Move the sensor assembly closer to the
display console.
Accuracy
± 5% (only guaranteed
between 20 to 90%)
± 0.08 inHg
will be constantly displayed.
will turn off, and the current
22
Resolution
1 %
0.01 inHg