SOMFY DEXXO COMPACT io Manual page 41

DEXXO COMPACT io
9 P
ROGRAMMING ON AN IO LIGHT RECEIVER
This function enables automatic activation of remote lighting connected to the io light receiver during garage door movements.
1
NOTICE
For this operation, use a Somfy io control point already saved on the io light receiver.
1. Press the "PROG" button on the saved control point until the light switches on.
NOTICE
If the SET indicator light is off, briefly press a button to exit low consumption mode.
2. Press the "PROG" button on the motor.
ð The integrated lighting and "PROG" indicator light flash for 5 s.
ð The lighting connected to the light receiver switches on and then goes out.
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
2
41