SOMFY DEXXO COMPACT io Manual page 39

DEXXO COMPACT io
4-button remote controls
1. Press the outer left and right buttons on the previously memorised remote control simultaneously until the indicator light
flashes.
2. Press and hold the button to be copied on the previously memorised remote control for 2 seconds.
3. Briefly press the outer left and right buttons on the new remote control simultaneously.
4. Briefly press the button selected to control the drive on the new remote control.
8.2 Memorising the 3-button remote controls
8.2.1 Via the programming interface
1
NOTICE
If the SET indicator light is off, briefly press a button to exit low consumption mode.
1. Press the "PROG" button (≈2 s) until the integrated lighting and the "PROG" indicator light are lit constantly.
NOTICE
Press "PROG" again to proceed to memorising the next function.
2. Press "PROG" at the back of the remote control.
ð The integrated lighting and "PROG" indicator light flash for 5 s.
8.2.2 By copying a previously memorised remote control
CAUTION
This operation must be carried out close to the drive.
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
2s
2
39