SOMFY DEXXO COMPACT io Manual page 23

DEXXO COMPACT io
4 Q
UICK COMMISSIONING
4.1 Powering on the installation
DANGER
Connect the power supply cable to a socket provided for this purpose and which complies with the electrical requirements.
Connect the motorisation to the mains and power on the installation.
The integrated lighting flashes 3 times and the "SET" indicator light flashes slowly.
NOTICE
Position of the antenna
The antenna must exit the motor housing as shown in the figure to avoid affecting the radio range.
4.2 Configuring the door type (Dexxo Compact 1000 io only)
CAUTION
Dexxo Compact 1000 io is configured by default for installation on a sectional door.
If the drive is installed on a side or up-and-over door, change the value of parameter P5:
P5
Values
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
Door type
1: Sectional
2: Side
3: Up-and-over
23