Manager Operation
3-3-1. System connection check
Note:
R-94
This command shows the connection status of terminals, and printers.
↓
Physical ID, Logical ID
RS-232C printer recognition (1: printer (1), 2: printer (2), 4: slip printer
Un recognized RS-232C printer
LAN printer ID, IP address
Unrecognized LAN printer
If there is unrecognized terminal there it shows "*" as below.
example)
#04 ************
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "1. System Connection Check" and press the <YES>
key.
4. After checking the system connection, press the <ESC> key
to return the previous menu.