Manager Operation
3-3-6. Drawer for clerk
3-3-7. CHK# (Clerk interrupt)
R-98
This command is used to designate the drawer 1 ~ 2.
↓
This command is used to designate the check number for clerk interrupt to each clerk.
↓
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "6. Drawer for Clerk" and press the <YES> key.
The display shows "Clerk name/Drawer No." list.
4. Select the drawer No. field of the appropriate clerk, enter the
drawer number (1 or 2, "0" means drawer 1), and press the
<YES> key.
5. Press the <ESC> key to return to the previous menu.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "7. CHK# (CLK Interrupt)" and press the <YES> key.
The display shows "Clerk name / Check No." list.
4. Select the check No. field of the appropriate clerk, enter the
check number (within 6-digits), and press the <YES> key.
5. Press the <ESC> key to return the previous menu.