Table of Contents
Advertisement
3-6-2. X/Z consolidation
3-6-2-1. X consolidation processing
QT-6600 Reference Manual
This function is used to obtain the sum of counters and totals of all objected terminals in
the store.
After consolidating data from all objected terminals, the master prints the details on the
printer.
Regardless of whether they are in the process of registration, the satellite terminals send
data and do not print out the reports, when X consolidation is performed. But, during the
Z consolidation, satellites are locked from registrations.
X consolidation processing is performed as the figure shown below.
1
Satellite
Terminal
files
2
1 An X consolidation command is started up from the master terminal.
2 Data of the objected terminal file are sent to the master terminal, and are copied to the
consolidation work file.
3 The data in the consolidation work file is added to the consolidation file.
4 The same process described in item 1 to 3 is executed for other terminals.
5 After the above collection processing is completed for all objected terminals, the data
accumulated in the consolidation work file are reported on the master's printer.
Master
Terminal
5
files
2
Consolidation
work
3
Consolidation
files
R-125
Advertisement
Table of Contents
