Manager Function; System Connection Check - Casio QT-6000 Reference Manual

Manager Operation

3-3. Manager function

3-3-1. System connection check

MGR C01 10-10-01 12:34
Manager Mode

1.System Connection Check

2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
System Connection Check
INLINE 312Kbps
#01 MC#01
RS-232C Printer
#02 MC#02
RS-232C Printer
#03 MC#03
RS-232C Printer
Note:
R-86
Using the manager function makes it possible to control the terminal conditions. The
contents of the manager function are as follows:
1. System connection check
2. Remote on
3. Remote off
4. Busy reset
5. Stock maintenance
6. Drawer for clerk
7. CHK# (Clerk interrupt)
8. Order ID change
9. Error log print
10. System re-configuration
11. Item Data Capture
12. EURO Change over.
13. Clerk window
14. Customer
15. Customer Busy Reset
16. Recording
17. Clerk number
18. Operation monitor
This command shows the connection status of terminals, and printers.
000000
↓
0.00
Physical ID, Logical ID
1 2 4 RS-232C printer recognition (1: printer (1), 2: printer (2), 4: slip printer
1
*
Un recognized RS-232C printer
0.00
If there is unrecognized terminal there it shows "*" as below.
example) #04 ************
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select "1. System Connection Check" and press the <YES>
key.
4. After checking the system connection, press the <ESC> key
to return the previous menu.