Table of Contents
Advertisement
Hardware Configuration
1-7.
Optional peripherals
R-16
The following optional peripherals can be used by plugging them into the appropriate port.
1) Personal computer / MODEM: RS-232C COM 1 port
2) Scanner: RS-232C COM 2 port
Hand-held scanner, Fixed scanner
3) Slip printer: RS-232C COM 2 port
SP-1300
In case of installing both scanner and slip printer, connect slip to COM 4, 5 port.
If you connect the slip printer to COM 4 , the automatic detection during INIT does not
performed. You muse program the I/O parameter manually.
4) Remote display: RS-232C COM 3 port
QT-6060D
5) Remote printer (UP-400/360): RS-232C COM 4 ~ 6 port
The remote printer is used for reports/kitchen orders/receipts.
6) Inline: Inline port
You can use CAT5 UTP cable.
7 Drawer: drawer port
8) CF card: CF card slot (in the power switch cover)
9) PS-2 keyboard (Microsoft Wired Keyboard RT2300): PS-2 keyboard port
Advertisement
Table of Contents
